|
Low-Cost
Rough Terrain Tilt Switches
for Equipment in Motion:
Used on all types of Agricultural, Construction, Off-Highway, Turf Care
Equipment and Tilt/Tip Trailers
|
 |
 |
|
SlopeAlert Specifications Brochure
|
RTS
Models
Single Axis, Small Noryl Enclosure |
RTS, RTA, RTC Models
Single Axis 50º or over, Dual Axis or Dual Senor Same Axis,
Noryl Enclosure |
|
Features
-
Single and Dual Axis
-
Single Supply Input
-
Reverse Polarity Protection
-
Output Short Circuit Protected
-
High Current-Sink Capability
-
Inductive Load Protection
-
-40°C to +75°C Operating Temperature Range
-
Rugged Hermetic Packaging
-
Shockproof to 500g
-
Weatherproof
-
Lamp / Solenoid Driver
-
Open Collector Switch Output
-
Mercury Free
|
Overview
The SlopeAlert is a reliable, low cost solution of determining
in-range and out of range tilt conditions.
It is designed for off-road, in-motion vehicles and equipment
that operate in high vibration/shock, rough terrain environments.
Two of the most common applications for this warning device are:
1) to help prevent vehicle or equipment rollover on steep slopes; and 2) to aid
track vehicles that need protection for over rotation while in motion,
especially in rough terrain. Connected to a lamp, horn, or solenoid relay, this compact Single
or Dual Axis unit can indicate both safe and unsafe conditions as well as
provide a control signal to help prevent equipment over rotation.
Even though the SlopeAlert System was designed for monitoring vehicle
inclination in off-road, rough terrain environments, it is well suited for any
application where inclination needs to be limited. Other industrial
applications include irrigation controls, turf care, construction equipment,
lift vehicles, tip or tilt trailers, dump trucks and earth moving equipment.
OEM's welcome!
|