| |
Creating a SlopeAlert part number for a quote is easy as
1 - 2 - 3! |
| |
1)
Select the specifications that most closely match your application need. |
2)
Add your comments, description of application and any questions. |
3)
Fill in your contact information so we can make sure we get your quote to
you. Hit submit, and you're done! |
1
|
Choose Single or Dual Axis and Housing Combinations:
|
|
Standard
mounting: Horizontal (sitting on table top),
Vertical mount upon request only and limited.
RTA/RTC:
Horizontal mount only |
|
Type in Switching Angle 1
Standard angles are 5, 10, 15,
20, 25, 30, 35, 40, 45° |
Single Axis SIDE to SIDE (ROLL)
Trip Angle Setting |
Custom angles
available.
Minimum
available is ±5º, in 1º increments. |
|
Type in Switching Angle 2
Standard angles are 5, 10, 15,
20, 25, 30, 35, 40, 45° |
Dual Axis FRONT to BACK (PITCH) Trip
Angle Setting |
Custom angles
available.
Minimum
available is ±5º, in 1º increments. |
|
Choose Power Input value |
|
External buzzer limitation: match or work within
voltage8-30VDC (not AC). |
|
Choose Output value |
|
Normally Open (NO) = alarm off until Switch Angle achieved or
out of range condition.
Normally
Closed (NC) = alarm on until Switch Angle achieved or in range condition.
Sinks Current Only (NPN Transistors) |
|
Choose Self Test parameter |
|
|
|
Choose LED option |
|
|
|
Choose Buzzer option |
|
RTA limited to1 buzzer. |
|
Choose Internal Load Resistor option |
|
|
|
Choose Cable Length |
|
|
|
Choose Quantity |
|
2
|
Comments, Application Notes, Questions &
Special Requests: |
|
Please note that certain combinations may not be
compatible with every unit. |
| |
Please Note: Some combinations are not
available in certain model configurations. |
3
|
Please
provide
the
following
contact
information: |
|
Contact Name |
|
|
Organization/Company |
|
|
Day Time Phone |
|
|
E-mail Address |
|
| |
|
|
