⚠️ Vendor Alert: Malicious Activity Using Rieker Inc.’s Name
Vendor fraud has become a significant issue in the business marketplace, and we’ve noticed an alarming increase in its prevalence. Please be informed that Rieker has never issued a Purchase Order (PO) using private email addresses such as Gmail, Yahoo, or iCloud. This is a crucial measure to ensure the utmost security for our prospective vendors. Please note that it’s rare for Rieker to open POs with unauthorized vendors requesting net 30 terms. Therefore, if you suspect that you may have received a suspicious PO, please don’t hesitate to contact our main number at (610)-500-2000 to verify the authenticity of the PO.
For a first time PO, please contact us directly via purchasing@riekerinc.com for confirmation as an added precaution.
The BH3 CAN J1939 inclinometer is a rugged, high-resolution tilt sensor engineered for critical applications that demand reliable angle measurement in harsh environments. Designed for vertical-mounted single-axis or horizontal-mounted dual-axis operation, the BH3 supports the SAE J1939 protocol and delivers dependable performance across industrial and mobile equipment platforms.
With a ±85° range, 0.01° resolution, and ±0.15° temperature-compensated accuracy, the BH3 provides clear, repeatable angle data in environments where precision matters.
BH3 key features
The Smart Choice for Tough Jobs and Seamless Integration
Dual or Single Axis Measurement Based on Orientation
±85° digital range with high resolution (0.01°)
- horizontal mounting has dual-axis output
- vertical mounting has single-axis output
Dual Redundant MEMS Sensors
Two independent sensors per unit provide continuous fault checking for mission-critical reliability
CAN SAE J1939 Output
Seamless integration with vehicle and industrial control networks
Wide Input Voltage Range
(7–35VDC)
Compatible with 12V, 24V, and mixed-system architectures
Fast Startup (<300ms)
Rapid boot-up for systems with frequent power cycling or critical safety functions
User-Tunable Damping Filter
Six selectable digital filtering levels to optimize responsiveness in vibration-heavy environments
EMC Protected & IP67 Sealed
Durable nylon 66 housing resists water, dust, shock, and electrical interference
Industrial Temperature Range
Reliable performance from -40°C to +85°C
TE Axisense-2™ Drop-In Replacement
Ask us about our TE Axisense-2™ drop-in replacement
The BH3 CAN J1939 inclinometer offers a sensor configuration engineered to directly replicate and replace the TE Axisense-2™ – delivering matching mechanical dimensions, electrical specs, and communication protocols and is configurable to directly support integration in systems currently using TE Axisense-2™ sensors – specifically those in the DOG1 MEMS single-axis series (e.g., G-NSDOG1-006) and DOG2 MEMS dual-axis series (e.g., G-NSDOG2-200).
- Designed for direct retrofit without mechanical redesign
- Supports same CAN protocol structure and electrical behavior
- Available now with technical support and documentation
Whether you’re updating legacy hardware, replacing hard-to-source TE sensors, or planning a platform migration, the BH3 provides a modern, supported solution built for long-term success.
We can help you transition without delays or redesigns. Our drop-in solution minimizes downtime and preserves system performance.
Minimal downtime. No surprises. Fully supported.
Flexible by Design – One Platform, Many Possibilities
Instead of fixed configurations, the BH3 CAN J1939 inclinometer is engineered to adapt to your application requirements:
- Mounting orientation
- CAN J1939 network settings
- Voltage compatibility (+7 to +35 VDC or higher on request)
- Filtering and responsiveness
- Environmental ruggedization
We work with OEMs, integrators, and engineers to deliver the right fit without compromise.
Core Specifications – BH3 CAN J1939 inclinometer
- Measurement Range: ±85°
- Accuracy: ±0.15° @ 20°C, ±0.25° full temp range
- Resolution: 0.01°
- Response Rate: 100 Hz
- Protocol: CAN SAE J1939 (250Kbps)
- Startup Time: <300 ms
- Redundancy Threshold: 1.5° default (user adjustable 0.1°–5.0°)
- Operating Temp: -40°C to +85°C
- Housing: Rugged nylon (6,6), IP67 sealed
- Mounting: Specify vertical or horizontal mounting – M6 screws
BH3 CAN J1939 inclinometer- Ideal for Harsh and High-Stakes Applications
- Aerial Work Platforms
- Boom Angle Indication
- Heavy Equipment Control
- Autonomous Vehicle Systems
- Solar Panel Tracking
- Antenna Positioning
- Process Machinery Alignment
Frequently Asked Questions
Is the BH3 a drop-in replacement for the TE G‑NSDOG2‑207?
Yes. The BH3 replicates the mechanical footprint, communication protocol, and operating behavior of the G‑NSDOG2‑207 sensor, making it a drop-in replacement.
Can I replace a TE DOG1 sensor with the BH3?
Yes. The BH3 can be configured for single-axis output to match legacy TE DOG1 devices like G‑NSDOG1‑006 or G‑NSDOG1‑022.
What protocol does the BH3 support?
The BH3 communicates over the SAE J1939 CAN Bus, with options for 11-bit or 29-bit identifiers, configurable PGNs, and baud rates.
Ready to Configure or Replace
Whether you’re replacing legacy parts like the TE Axisense-2™ or specifying a sensor for a new system, the BH3 is ready to deliver precision, reliability, and confidence – wherever your application takes it.